HP-CAS(E)-436 Cold Applied Splices(Economic)

HP-CAS(E)-436 Cold Applied Splices(Economic)
Product Details

HP-CAS(E)-436   Cold Applied Splices(Economic)

Application:

The cold applied splice(Economic) product line is designed at a single component in-line splice to provide high environmental

protection to seal the termination from moisture and provide electrical isolation. If moisture is present,it can lead to insulation

failure and breakdown of the electrical connection.

Characteristics:

One-step termination and environmental protection

No heating required for installation — safe for use on fueled aircraft

Reliable in a wide variety of environmental conditions

Easy installation and application flexibility

Prevents water ingress under permanent pressure/weight

Temperature range:-55˚C to 125˚C

Dielectric strength: 2,500 V Maximum

Technical Data:

Property

Specification Requirements

Test Methods

Typical Value

Tensile strength(Room temp.)

Min. 16Mpa

ISO37

18.5Mpa

Elongation at break (Room temp.)

Min. 200%

ISO37

450%

Tensile strength after aging(158℃/168hrs)

Min.11.5Mpa

ISO37

15Mpa

Elongation after aging(158℃/168hrs)

Min.100%

ISO37

220%

Voltage withstand(Un-aged)

Wifhstand 2.5 KV for 1minute and breakdown

UL224

Pass

Voltage withstand (Aged)

Withstand 2.5 KV for 1minute and breakdown
at least half of un-aged breakdown voltage

UL224

Pass

Copper corrosion(158℃/168 hrs)

No corrosion of bare copper

UL224

No sign of deg

Copper stability(158℃/168 hrs)

No sign of degradation Min. Elongation 100%

UL224

Pass

Cold bend(-30℃/1hrs)

No crack

ISO6722

Pass

Maximum secant modulus(2%)

250Mpa

ASTMD882

Pass

Volume resistivity

Min. 1014Ω-cm

ASTMD2671

Pass

Heat shock(250℃/4 hrs)

No crack

ASTMD2671

Pass

Size:

图片3.png 

Part No

Color

L±1.0 (mm)

øA±0.5 (mm)

øB±0.25 (mm)

øC±0.5 (mm)

E±0.25 (mm)

HP-CAS(E)-436-01

Red

36

4.8

4.5

4.7

15

HP-CAS(E)-436-02

Blue

36

5.8

5.5

5.7

15

HP-CAS(E)-436-03

Yellow

40

6.8

6.5

6.8

15

 


Feedback