HP-SST-100-SD Shrink Step-Down Solder Seal Sleeve

Product Details

■ Application:

Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation Pre-fluxed solder provide controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and switch terminals.Step Down design make it easy to connect big size and small size wire or one wire connecting two wires.


■ Characteristics:

●Shrinkage ratio 2:1
     ●Waterproof for wiring splices
     ●Transparent sleeve provides precise inspection
     ●Easy control soldering process      
     ●Minimum Shrink Temp. 60℃
     ●Minimum Fully Recover Temp.110℃
     ●Fully melt temperature of solder: 138℃

 




■ Technical Data:


Operating temperature-55℃~125℃
voltage Resistant>600V
Protection typeIP67
Volume Resistivity (Ω cm):≥10 15
Dielectric Strength (KV/mm)≥25

■ Size:







Product CodeSize Code Color item 3

L(mm)

Qty Item 2Φ A Min (mm)Wire Dimensions
     (mm)
Cable size
     AWG  (mm2)
B MinB Max
     C Max
C Min
HP-SST-100- SD-WRWhite/Red4011.7
1.32.70.7622-18(0.5-1.0)
HP-SST-100- SD-RBRed/ Blue
4012.71.84.51.222-14(0.5-2.5)
HP-SST-100- SD-BYBlue/ Yellow
4014.5
2.86.02.016-10(1.5-6.0)

Other sizes are available upon request.

●Item 1 : Heat shrinkable Sleeve , Transparent ,Radiation cross-linked modified polyolefin.
 ●Item 2:  Solder Ring with flux
●Item 3: Glue rings


 ■Color:
 Standard color: White, Red, Blue,Yellow
 Other colors are available upon request.

Feedback