HP-DS-ENDCAP Shrink Endcap terminal

Product Details

■ Application:
HP-DS-END CAP the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Half part non shrink plug-in terminal providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp terminals.
■ Characteristics:
● Shrink ratio 3:1
● Especially designed heat shrinkable tubing has an active adhesive that seals between multiple wires
● Shrink closed-end connectors can replace wire nuts in environments where need to be sealed
● Excellent stretch and mechanical damage resistance
● High elasticity keeps steady performance
● Water proof and moisture resistance
● Operating temperature range:Operating temperature :-55 ℃ ~ 125℃
● Minimum shrink temperature:80℃
● Minimum fully recovery temperature:130℃

■ Technical Data:

Test ItemCharacteristicsTest condition
UnagedTensile strengthMin. 16MPaRoom temp
ElongationMin.200%
AgedTensile strengthMin. 11.5MPa158℃/7 days
ElongationMin. 100%

Voltage withstand and breakdown

Voltage(Unaged)

Withstand 2.5KV for 1 minute and breakdownRoom temp.
Voltage withstand and breakdown 

Voltage(Unaged)
Withstand 2.5KV for 1 minute and breakdown at least half of unaged breakdown voltage158℃/7 days
Copper corrosionNo corrosion of bare copper158℃/7 days
Copper stabilityNo sign of degradation Min. Elongation 100%158℃/7 days
Cold bendNo crack-30℃/4 hrs
Maximum secant modulus (2%)250MPa-
Volume resistivityMin. 1014Ω-cm-
Heat shockNo crack250℃/4 hrs

■ Size:

Part No
Color codeConductor
HP-DS-ENDCAP-2216Red(AWG22-16)
HP-DS-ENDCAP-2214Blue(AWG22-14)
HP-DS-ENDCAP-1810Yellow(AWG18-10)

Other sizes are available upon request.
■Color:
Standard color: Red, Blue,Yellow.


Feedback